更多 Cutting Mills

 
 

更多产品组别

 
 

Universal Cutting Mill - variable speed 300-3000 rpm

PULVERISETTE 19

订货号
19.3060.00
 
 

AT A GLANCE

  • Rotor speed 300-3000 rpm, variable adjustable
  • Optimised Clean Design for maximum ease of cleaning
  • Corrosion-resistant stainless steel version 316L available
  • Maintenance–free 5 kW three-phase motor with frequency converter

IDEAL FOR

  • PLASTICS AND TEXTILES
  • AGRICULTURE AND FORESTRY
  • ENVIRONMENT
  • ROHS
  • ANALYTIC
  • CONSTRUCTION MATERIALS
  • CHEMISTRY
  • FOOD STUFFS
  • OVERVIEW

    Variable 300 – 3000 rpm for fine comminution

    Due to the variable rotational speed adjustment in increments of hundred between 300 and 3000 rpm you can fine tune the comminution process for each sample within a very wide range of applications. The high-speed Universal Cutting Mill PULVERISETTE 19 with a torque of up to 30 Nm comminutes dry, soft to medium-hard sample materials and fibrous materials and plastics with reliable reproducible results with a maximum feed size of 70 x 80 mm and a throughput of up to 60 l/h.
    One special advantage: Straw, films and similar materials can be fed in up to their full length without additional preparation. And the PULVERISETTE 19 is also ideal for RoHS tests. Due to Clean Design of the PULVERISETTE 19, it is easy to clean and offers a safe protection against cross-contamination.

    FRITSCH also offers a low-speed Universal Cutting Mill with 50-700 rpm for a powerful comminution.

  • WORKING PRINCIPLE

    Unique grinding chamber geometry

    The sample material is comminuted according to the cutting principle of scissors between the cutting edges of the rotor and the fixed knives in the grinding chamber until the desired final fineness is achieved. Unique grinding chamber geometry: The grinding chamber is designed with minimal dead space and progressive cutting geometry between rotor and fixed knives. The sample material is continuously moved during comminution and cannot settle anywhere. In conjunctions with the special air flow, this is the basis for swift, blockage-free operation and fast cleaning without residue.

    Running stabilisation due to flywheel mass

    The Universal Cutting Mill PULVERISETTE 19 is equipped with a flywheel mass to stabilize the drive torque. This ensures stable operation even for extreme short-term load, as well as an optimal comminution result.

  • FEATURES
    • Fast, effective comminution with variable adjustable rotational speed of 300 – 3000 rpm
    • Max. feed size 70 x 80 mm
    • Throughput of up to 60 l/h
    • Defined final fineness due to interchangeable sieve cassettes 0.2 – 10 mm, (further sieve sizes available)
    • Collection vessel  0.25 litres to 60 litres
    • Optimised Clean Design for maximum ease of cleaning
    • Practical operation directly on the front panel
    • Maintenance–free 5 kW three-phase motor with frequency converter
    • Single-phase versions with maintenance-free three phase frequency converter
    • Externally adjustable cutting gap
    • Double cone bearing of the rotor for long service life
    • Standard funnel for long solids or protected funnel with sample pusher 
    • Different rotors for multi-functional use
    • Wear-free labyrinth seals made of stainless steel on both sides of the rotor – on the shaft and in the lid
    • Rotor knives and fixed knives are exchangeable for long-lasting quality
    • Optimum airflow for fast comminution and anti-clogging 
    • Sample exhaustion with FRITSCH cyclones
    • View extensive accessories

       

  • SIMPLE CLEANING

    Unmatched easy cleaning!

    While you are still tightening the screws on other mills, your FRITSCH Cutting Mill is already clean. Because with just a few simple motions the entire grinding chamber can be opened and rotor and sieve cassette can be removed without tools. The housing and lid can be lifted back completely, and the grinding chamber lid can be completely removed from the hinges.
    The result: a completely open empty grinding chamber with minimised dead space for easy quick cleaning and safe protection against cross-contamination.

    FRITSCH-Plus: The sieve cassettes with square perforation made of stainless steel 316L for all PULVERISETTES 19 and PULVERISTTES large models are laser welded and ensure with less dead space a clearly simpler cleaning.

    Removable wear-free labyrinth seals for fast, residue-free cleaning
    The labyrinth seals made of stainless steel – on both sides of the rotor as well as on the shaft and in the lid - are wear-free and offer effective contamination protection and no additional heat effect for your samples.

  • COLD COMMINUTION - EMBRITTLEMENT

    Effective comminution with dry ice and liquid nitrogen

    Due to the well-conceived instrument design and the materials used, it is no problem to comminute pre-cooled materials or samples embrittled with liquid nitrogen.
    The improved breaking behaviour enables efficient comminution also of sticky, tough-elastic or temperature-sensitive materials with dry ice or after previous embrittlement of the sample with liquid nitrogen.

  • FRITSCH CYCLONES

    Optimal sample exhaustion with FRITSCH Cyclone separators

    Clean, convenient, cool: Combine your FRITSCH Universal Cutting Mill PULVERISETTE 19 with a FRITSCH Cyclone separator for sample exhaustion. Its strong airflow ensures simple feeding, increases throughput, and reduces the thermal load of the samples.
    At the same time, the powerful airflow of the FRITSCH Cyclone separators enables the use of finer sieve cassettes to achieve a higher final fineness – even for materials, which are otherwise difficult to comminute finely.
    The result: especially fast and efficient comminution with minimised thermal load and significantly higher throughput – in addition to quick and easy cleaning.
    The FRITSCH high-performance Cyclone separator completely made of stainless steel 304 is particularly indispensable in the analytical sector and in the food and pharmaceutical industries, and for the processing of heterogeneous mixtures of material, e.g. in the cement industry. Especially for exhaustion of small sample quantities, we designed the compact FRITSCH small volume Cyclone separator.
    We also offer a standard Cyclone separator.

    Details about the FRITSCH CyClones

  • FOOD AND PHARMACEUTICAL INDUSTRY

    Completely in stainless steel for the analytical sector, food and pharmaceutical industry

    The Universal Cutting Mill PULVERISETTE 19  is also available in a corrosion-resistant stainless steel version 316L, whose materials are resistant to alkalis and acids and conform to the guidelines of the food and pharmaceutical industry.

    details about the PULVERISETTE 19 in the corrosion resistant stainless steel version 316L

  • COMFORTABLE OPERATION

    Complete operation at the front

    The well-designed control panel keeps all functions, including the on/off switch, easily accessible on the instrument's front panel. The rotational speed is set in increments of hundred with the plus/minus buttons and shown on the digital display.

  • EQUIPMENT / ACCESSORIES

    Configure your Universal Cutting Mill PULVERISETTE 19 with variable rotational speed of 300 – 3000 rpm exactly to your specific application

    The Universal Cutting Mill PULVERISETTE 19 is delivered without funnel, cutting tool set (consisting of rotors and fixed knives), sieve cassette, collection vessel and stands. Various funnels, collection vessels, rotors and fixed knives, sieve cassettes and stand made of various materials enable you to configure the Universal Cutting Mill exactly for your application.

    View extensive accessories

订货号
19.3060.00
Jessica Seifert
FRITSCH GmbH - Milling and Sizing
Industriestrasse 8
55743 Idar-Oberstein
电话 +49 67 84 70 0

研磨报告数据库

现在就来测试

免费试研磨

请您将样品寄给我们,我们将进行试研磨 - 您会得到一份相应的研磨报告。