www.fritsch.de
 

更多 Planetary Mills

 
 

更多产品组别

 
 

Vario-Planetary Mill PULVERISETTE 4 classic line

 
 

AT A GLANCE

  • Flexible configurable grinding conditions: impact and/or friction
  • Useful capacity of up to 2 x 225 ml
  • Fast grinding with rotational speeds up to 400 rpm
  • Loss-free grinding even below 1 μm

IDEAL FOR

  • MATERIAL TECHNOLOGY
  • GEOLOGY AND MINERALOGY
  • CERAMICS
  • CHEMISTRY
  • BIOLOGY
  • PHARMACEUTICALS
  • METALLURGY
  • ANALYSIS PREPARATION
  • OVERVIEW

    Unique with a variable transmission ratio

    In contrast to conventional Planetary Mills, the rotational speed of the grinding bowls and supporting disk can be configured separately in the PULVERISETTE 4 classic line with 2 working stations. Your advantage: A single mill for mechanical activating and alloying providing optimum grinding conditions suited to the respective material to be ground and the size of the grinding bowls and balls! For results that cannot be achieved with other Ball Mills.
    The mill is controlled by integral software, in which up to 9 programmes can be saved and then loaded quickly and easily via the mill display.

  • WORKING PRINCIPLE

    Variable Transmission Ratio

    The PULVERISETTE 4 classic line also operates according to the Planetary Principle, but the transmission ratio between grinding bowls and supporting disk is variable adjustable. Your advantage: You can directly influence the movement and paths of the grinding balls: Depending on the setting, you can obtain high impact energy or high friction, according to your needs, or have your PULVERISETTE 4 classic line operate as a Centrifugal Mill. You are free to choose all intermediate levels and combinations between friction-based and impact-based comminution.
    Due to the rotational speed of the main disk – up to 400 rpm – achieves the PULVERISETTE 4 classic line a centrifugal acceleration of up to 22 g.

  • FEATURES
    • Flexible configurable grinding conditions: impact and/or friction
    • Rotational speed up to 400 rpm
    • Ideal for mechanical alloying and activating
    • Especially suited for material research and development applications
    • Simultaneous processing of up to 4 samples
    • Useful capacity of 2 x 0.5 ml to 2 x 225 ml
    • Free programming of the grinding parameters, incl. grinding and pause times and grinding cycles through PC software
    • Real-time display of the rotational speed for monitoring of the grinding process
    • WINDOWS™ control and evaluation programme
    • Reversing function
    • Forced air ventilation of the grinding chamber
    • Safety interlock of the grinding chamber with standstill monitoring
    • Overload protection through rotational speed adjustment
    • Maintenance-free drive
    • Long service life due to high-performance belt drives and permanently lubricated bearings
    • Membrane keyboard
    • Extensive accessories for simplifying your daily work

    View extensive accessories

  • MEASURING OF GAS PRESSURE AND TEMPERATURE

    GTM – Gas Pressure and Temperature Measuring System

    The Vario-Planetary Mill PULVERISETTE 4 classic line can be combined with the GTM-System for measuring of the gas pressure and temperature during grinding. This turns your mill into an analytical measuring system.

    VIEW SPECIAL ACCESSORIES

  • EQUIPMENT / ACCESSORIES

    Configure your Vario-Planetary Mill PULVERISETTE 4 classic line exactly to your specific application

    The Vario-Planetary Mill PULVERISETTE 4 classic line with 2 working stations operates with 2 respectively 4 grinding bowls of sizes 12, 45, 80, 250 or 500 ml. The transmission ratio between grinding bowl and planetary disk is variably adjustable. To achieve best grinding results, grinding bowls and grinding balls are available in various sizes and 6 different materials. Contamination of the samples due to undesired abrasion can be directly prevented. For grinding in inert gas, for mechanical activation and alloying are gassing lids recommended.

    View extensive accessories

订货号
04.1030.00
Janine Allkofer
FRITSCH GmbH - Milling and Sizing
Industriestrasse 8
55743 Idar-Oberstein
电话 +49 67 84 70 0

研磨报告数据库

现在就来测试

免费试研磨

请您将样品寄给我们,我们将进行试研磨 - 您会得到一份相应的研磨报告。